Hysteroscopy solution - Office hysteroscopy - Endoscopy

Description

SEE AND TREAT
The MEYONA Hystero Case is a convenient solution for office hysteroscopy. It is meant for use in exam room with no additional equipment, but computer and monitor only.
It is designed for examination and evaluation of the uterine cavity, and minor therapeutic and operative procedures such as biopsies and polypectomies.
The MEYONA Hystero Case facilitates assessment of infertility, trauma, abnormal uterine bleeding, mesh erosion and pre- and postsurgical evaluations.
Most importantly, patients appreciate the comfort and convenience of having hysteroscopic procedures done in a familiar setting, with minimum invasion without anesthesia or even speculum.
The HD USB endoscopic camera integrates illumination and imaging into a handheld unit, balancing high-performance and portability.
The rigid 30° angle HD optic scope allows optimum visualization of the uterine cavity with minimum movement of the scope.
The “See-and-Treat” 5.5 mm outer diameter hysteroscope works as well for a vaginoscopic approach that avoids cervical dilation and any impairment in cervical passage.
The Hystero Case is compatible with accessories such as semirigid 5 Fr 35 cm long biopsy forceps, scissors and alligator forceps.
Designed as a portable equipment, it is placed in a shock resistant, reinforced aluminum case.
Foam material inside provides additional optimum protection for the HD camera and scope.
For additional safety, the two locks could be locked separately.
EASY TO INSTALL, SIMPLY TO HANDLE
Take the optic and remove carefully the protection cap. Insert the optic in the optic channel of the hysteroscope shaft to the stop and lock by turning the ring clockwise. Then connect it to the outer sheath where the pointers indicate, then click the button.
Place the camera with the buttons up, open the lock of the camera unit’s optical adapter.
Connect the endoscope and release the lock to fix it.
Connect the self-locking LED light connector to the lighting interface in camera unit and connect the other end of the LED light to endoscope, rotate it clockwise to tighten it up.
Make sure that the red dot of the LED light is aligned to the red dot in the lighting interface of the camera unit.
Select compatible auxiliary instrument and insert its distal end in the sealing cap on the working channel of the hysteroscopy shaft. Open the instrument valve. Insert the auxiliary instrument further in the working channel until the distal end appears in the endoscopic image.
To connect the irrigation hoses, close the irrigation valves, connect the supply hose to the supply valve and connect the return hose to the return valve.
After installation of endoscope, please, connect the HD Endoscope camera system to the USB3.0 port of computer.
After connecting to the computer, the operation system will install the driver automatically, if the driver is installed correctly, you will see our product in device manager > imaging devices.
Open the specific software to real-time view and record the image under endoscope. After opening the specific software, you can use the LED light brightness adjust button to adjust output brightness.
Before using, you can target endoscope to white object like white paper and long press button
to auto-adjust white balance parameters.
There are three buttons in the camera unit. Button and button
are used for reserved functions.  Button is used for LED light brightness adjustment and shut, LED light brightness can be adjusted from level 1 to level 5.
After using, please close the PC software, then unplug the camera, and keep all components in the packing box.
TAKE AND TREAT
MEYONA HYSTERO CASE